DC 11.1V-29.6V 5065 Inductive Sensored Motor For Electric Balancing Scooter GHB

  
Strong power, long-lasting battery life, high-speed operation, high temperature resistance, high power, high torsion. The use of multi-strand windings has better heat dissipation and avoids skin effect. Single-strand winding will cause skin effect and generate heat, which is easy to low efficiency. Curved magnets on both sides increase the suction power, play an excellent mute effect, enhance the attractive force of the magnet, and improve the lasting quality. For Hall plate: tightly fixed on the stator, more firm and not easy to fall off, it helps the motor to run more stably. With long for Hall wire, more heat resistant, with braided sleeves, more refined details.

Condition: 100% Brand New Item Type: Inductive motor Material: Silicone Wire + Japanese Steel + Red Copper Color: As Pictures Shown Weight: Approx. Maximum Power: 1550W Maximum Current: 80 Amps No-load Current: 1A 10V Maximum Voltage: 41.5V Lithium Battery:3S-8S(11.1V-29.6V) Maximum Torsion: 4Nm Motor Resistance: 64m? Motor Length: 65mm/2.6inch Motor Diameter: 50mm/2inch Shaft: Diameter 8mm/0.3inch, Length 20mm/0.8inch. Keyway Size: 3x3x15mm/0.1x0.1x0.6inch Motor Wire: 160mm/6.3inch Silicone 16AWG Wire with 4.0mm/0.2inch Gold Male Connector. Wire Configuration: Blue (Thermal Shrinkable Film) = A Black (Thermal Shrinkable Film) = B Yellow (Thermal Shrinkable Film) = C Brushless Motor Number of Poles: 14 Sensor Line: Standard RC Sensor Line JST-ZH 6-pin 1.5mm Pitch Internal for PCB with 120 Degree Hall Effect Sensor.

The Motor Can be Used with or Without Sensors. Sensorless Operation is the Most Common.

VESC Sensor Cable Required for VESC. Wire Configuration: Red = 5V Blue = A Yellow = C Green = B Black = GND.

What are the Characteristics of Our Products: Stator: Laminated Japanese Steel 12awg High-strand Silicone Cable with 4.0mm/0.2inch Gold Male Connector. Support Both Sensor and Sensorless Mode.

What to Include 5065 270KV EPOWER Motor (suitable for 50mm/2inch Motor Mount) If You Choose a Wheeled Motor, It Will be Randomly Divided into Black One or White One Reference Information: The Screws Used in the Motor are M4 Bolts. It is Recommended to Use Our Motor Mount and M4 Hex Socket Bolts. Screws for Mounting the Motor are Not Included with the Motor. The Key is Not Included in the Transport Motor. We will reply your message within 48 hours.

If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.